background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

10/10/19

Message Overview:

Fault Message:

R OIL TEMP WRG/PROBE/EEC XCK MA

Fault Code:

7327126RBR

Associated CAS:

None

Reporting LRU: Right Engine Electronic Controller (EEC)
System Description: 79-30-00
Schematic Diagram: 79-30-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 71-50-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

The fault message is set when there is an unsatisfactory difference between the signals from the two Oil Temperature Transducers. These are the Oil Temperature Transducer for Engine Electronic Controller (EEC) channel A and the Oil Temperature Transducer for EEC channel B. The Full-Authority Digital Engine-Controller (FADEC) continuously monitors the circuits of the two Oil Temperature Transducers.

Possible Causes:

  • Right Oil Temperature Transducer
  • Right Engine Electronic Controller (EEC)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Opening of the Cowls AMM 71-10-00-010-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Closing of the Cowls AMM 71-10-00-410-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Connection of Electrical Connectors EMM 70-50-01-910-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Eng Electronic Controller (EEC)
Mod 73-101559		 EMM 73-21-01-000-801-B00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Eng Electronic Controller (EEC)
Mod 73-101559		 EMM 73-21-01-400-801-B001 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Oil Temperature Transducer EMM 79-32-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Oil Temperature Transducer EMM 79-32-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Swap Right and Left oil temperature transducer.

    1. If system checks are good, replace Right oil temperature transducer and do close out.
    2. If fault remains, continue with next step.

  2. Perform wiring checks between the Right EEC and the Oil temperature transducer.

    1. If wiring checks are not good, repair defective wiring as required and do close out.
    2. If wiring checks are good,

  3. Replace Right EEC.
  4. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.