06/22/21
Message Overview:
Message Name:
COCKPIT LOUDSPEAKERS INOP
| Message Code: | 235OBS005 |
| Effectivity: | All |
| System: | Audio Integrating System |
| System Description: | 23-51-00 |
| Schematic Diagram: | 23-51-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 23-51-55 [ Global Express ] [ G5000 ] [ Global XRS ] |
Message Description:
One or both of the Flight Compartment Loudspeakers do not operate correctly.
Possible Causes:
- Audio Panel Switch
- Flight Compartment Loudspeaker 1 (A197)
- Flight Compartment Loudspeaker 2 (A198)
- Audio Panel 1 (A8)
- Audio Panel 2 (A9)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Flight Compartment Loudspeakers |
AMM 23-51-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Flight Compartment Loudspeakers |
AMM 23-51-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Operational Test of the Flight Compartment Loudspeakers |
AMM 23-51-01-710-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Audio Panels | AMM 23-51-05-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Audio Panels | AMM 23-51-05-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Make sure that the Audio Panel switches are configured properly. Refer to AMM task 23-51-01-710-801.
- Remove applicable cockpit loudspeaker (A197 or A198). Disconnect applicable Audio Panel (A8 or A9) connector (A8P1 or A9P1). Perform a continuity check as follows:
For Loudspeaker 1 (A197):From To Result A8P1-Y Ground A8P1-L Ground A8P1-Y A8P1-L For Loudspeaker 2 (A198):
From To Result A9P1-Y Ground A9P1-L Ground A9P1-Y A9P1-L - If there is continuity, repair defective wiring as required and do close out.
- If there is no continuity, continue with next step.
- Perform a continuity check as follows:
For Loudspeaker 1 (A197):From To Result A8P1-Y Speaker-H A8P1-L Speaker-L For Loudspeaker 2 (A198):
From To Result A9P1-Y Speaker-H A9P1-L Speaker-L - If there is no continuity, repair defective wiring as required and do close out.
- If there is continuity, continue with next step.
- Swap Audio Panels. Is the fault still present?
- If NO, replace the defective audio panel and do close out.
- If YES, continue with next step.
- Replace applicable Cockpit Loudspeaker.
- Do close out.