06/29/21
Message Overview:
Message Name:
ELT SELF-TEST CODED SIGNAL INDICATES 5 FLASHES
| Message Code: | 256OBS003 |
| Effectivity: | All |
| System: | Emergency |
| System Description: | 25-60-00 |
| Schematic Diagram: | 25-61-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 25-61-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Message Description:
Emergency Locator Transmitter (ELT) data is not present.
Possible Causes:
- Emergency Locator Transmitter (ELT) (A220)
- Emergency Locator Transmitter (ELT)/Navigation Interface Unit (A263)
- Integrated Avionics Computer (IAC) 1 (A11)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Notice To Operators (NTO): None
Flight Operation Notifications Manual (FONM): None
NOTE: No troubleshooting is necessary when no ELT/NAV interface unit is installed.
Quick Links:
| Removal of the Emergency Locator Transmitter (ELT) | AMM 25-61-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Emergency Locator Transmitter (ELT) | AMM 25-61-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Emergency Locator Transmitter to Navigation (ELT-NAV) Interface Unit | AMM 25-61-17-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Emergency Locator Transmitter to Navigation (ELT-NAV) Interface Unit | AMM 25-61-17-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Integrated Avionics Computers (IAC) | AMM 31-41-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Integrated Avionics Computers (IAC) | AMM 31-41-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Swap IAC 1 with IAC 2.
- If system checks are good, replace IAC 1 and do close out.
- If fault remains, continue with next step.
- Perform wiring check between ELT and IAC 1.
- If wiring checks are not good, repair defective wiring as required and do close out.
- If wiring checks are good, continue with next step.
- Replace ELT/NAV Interface Unit.
- If system checks are good, do close out.
- If fault remains, continue with next step.
- Replace ELT.
- Do close out.