07/01/21
Message Overview:
Message Name:
WEATHER RADAR WX (AMBER) DISPLAYED ON MFD STATUS WINDOW
| Message Code: | 344OBS026 |
| Effectivity: | All |
| System: | Weather Radar System |
| System Description: | 34-41-00 |
| Schematic Diagram: | 34-41-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 34-41-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Message Description:
Weather Radar Receiver/Transmitter Antenna (RTA) does not communicate with the Integrated Avionics Computers (IACs) via the RS-422 buses, when is powered and not selected to OFF (on any Weather Radar Control Panels). May also be associated CAIMS messages: FWC 1(2) (3)-WX/GPWS FAULT.
Possible Causes:
- Junction Box (JB3)
- Weather Radar Control Panel 1 (A122)
- Weather Radar Control Panel 2 (A92)
- Integrated Avionics Computer (IAC) 1 (A11)
- Integrated Avionics Computer (IAC) 2 (A10)
- Integrated Avionics Computer (IAC) 3 (A12)
- Weather Radar Receiver/Transmitter and Antenna (RTA) (A125)
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Operational Test of the Weather Radar System | AMM 34-41-00-710-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| General Visual Inspection of the Weather Radar Receiver/Transmitter and Antenna |
AMM 34-41-00-210-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Weather Radar Receiver/Transmitter | AMM 34-41-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Weather Radar Receiver/Transmitter | AMM 34-41-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Weather Radar Control-Panels | AMM 34-41-05-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Weather Radar Control-Panels | AMM 34-41-05-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Ensure that the RTA is powered via the SPDA and weather radar controllers are selected to STBY (or any position other than OFF).
- On the CAIMS PMAT, get access to system diagnostics and perform IAC-EDS, IAC EDS/Core Test, WX-R/T P880 interface test following the set up instructions on the PMAT.
NOTE: Run this test on all FWC, If not associated to a specific CAIMS message to a particular FWC. - After each test is completed, look at the TEST RESULTS page and record the fault type 43XX and code XX.
- Perform IMT fault code look up procedure and follow the associated troubleshooting procedure.
- Do close out.