background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE
(CAUTION)
AMBER MESSAGE
(ADVISORY)
CYAN MESSAGE
(STATUS)
WHITE MESSAGE
Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

07/06/21

Message Overview:

Message Name:

NO ITT INDICATION ON THE EICAS DISPLAY

Message Code: 772OBS003
Effectivity: All
System: Engine Temperature Indicating System
System Description: 77-20-00
Schematic Diagram: 77-20-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 77-20-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Message Description:

The Engine Electronic Controller (EEC) senses no Inter-Turbine Temperature (ITT) signal or that there is an unsatisfactory difference between the ITT signals in channel A and B. This causes the result of no primary ITT indication on the Engine Indication and Crew Alerting System (EICAS) Display in the Flight Compartment.

Possible Causes:

  • Inter-Turbine Temperature (ITT) Thermocouple
  • Engine Electronic Controller (EEC)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Connect Electrical Power to the Aircraft AMM 24-00-00-861-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Remove the Electrical Power from the Aircraft AMM 24-00-00-861-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Opening of Non-Thermal Circuit Breakers AMM 24-00-00-863-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Closing of Non-Thermal Circuit Breakers AMM 24-00-00-863-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Electrical/Electronic Safety Precautions AMM 24-00-00-910-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
CAIMS PMAT General Instructions AMM 45-45-00-970-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Access to Stored Faults AMM 45-45-00-970-803 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Write Fault Report to Printer AMM 45-45-00-970-818 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Flight Deck Effect to Fault Correlations AMM 45-45-00-970-821 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Engine Safety Precautions AMM 71-00-00-910-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Start the Engine AMM 71-00-00-866-806 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Engine Shutdown (Usual) AMM 71-00-00-866-809 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Perform the troubleshooting to find the active or stored fault messages shown during the fault confirmation. Go to the applicable troubleshooting as follows:
  2. Do close out.
Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.