06/10/19
Message Overview:
Fault Message:
[ACSC1-A] LH RECIRCUL FAN /WRG
Fault Code:
2161528ECS
Associated CAS:
| Reporting LRU: | Air Conditioning System Controller (ACSC) 1 |
| System Description: | 21-20-00 |
| Schematic Diagram: | 21-21-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 21-21-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
The left Recirculation Fan has been detected failed by the Left Air Conditioning System Controller (ACSC).
Possible Causes:
- Recirculation Fan And Check Valve 1 (B17)
- Air Conditioning System Controller (ACSC) 1 (A87)
- AC Power Center (ACPC) (A54)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Recirculation Fan and Check Valves | AMM 21-21-21-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Recirculation Fan and Check Valves | AMM 21-21-21-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Air-Conditioning System Controllers | AMM 21-60-21-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Air-Conditioning System Controllers | AMM 21-60-21-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Perform wiring checks between ACSC 1 and Left Recirculation Fan.
- If wiring checks are not good, repair the defective associated wiring and do close out.
- If wiring checks are good, continue with next step.
- Perform wiring checks between Left Recirculation Fan and ACPC.
- If wiring checks are not good, repair the defective associated wiring and do close out.
- If wiring checks are good, continue with next step.
- Make sure the recirculation fan is not obstructed.
- Swap left Recirculation Fan with right Recirculation Fan.
- If system checks are good, replace left Recirculation Fan and do close out.
- If fault remains, continue with next step.
- Replace ACSC 1.
- Do close out.