06/12/19
Message Overview:
Fault Message:
[ACSC2-A] CKPT DUCT TEMP SENS /WRG
Fault Code:
2163427ECS
Associated CAS:
| Reporting LRU: | Air Conditioning System Controller (ACSC) 2 |
| System Description: | 21-60-00 |
| Schematic Diagram: | 21-60-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 21-51-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
Cockpit Duct Temperature Sensor has been detected out of range by Air Conditioning System Controller (ACSC) 2 Channel A.
Possible Causes:
- Cockpit Duct Temperature Sensor (E28)
- Air Conditioning System Controller (ACSC) 2 (A88)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin:
- AW700-21-0160 - "PACK FAULT" CAS message while CAIMS / OMS is active (Global Express / XRS - 9002 to 9312, 9314 to 9380, 9384 to 9429 and Global 5000 - 9127 to 9383, 9389 to 9400, 9404 to 9431 and 9998)
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Duct Temperature Sensors | AMM 21-60-17-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Duct Temperature Sensors | AMM 21-60-17-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Air-Conditioning System Controllers | AMM 21-60-21-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Air-Conditioning System Controllers | AMM 21-60-21-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Check status of Duct Temp Sensor in CAIMS (CAIMS path: SYSTEM DIAG/21-00 AIR CONDITIONING/ACSC2A/LRU TEST/R ACSC CH. A TRIM & CABIN TEMP SENSOR DATA).
- Swap Cockpit Duct Temperature Sensors.
- If system checks are good, replace the defective Cockpit Duct Temperature Sensor and do close out.
- If fault remains, continue with next step.
- Perform wiring checks between Cockpit Duct Temperature Sensor and ACSC 2.
- If the wiring checks are not good, repair the defective associated wiring and do close out.
- If the wiring checks are good, continue with next step.
- Replace ACSC 2.
- Do close out.