background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

10/09/24

Message Overview:

Message Name:

BRAKE CONTROL VALVE OUTBD L/BCU/WRG

Message Code:

3245426HA

Reporting LRU: Brake Control Unit (BCU)
Associated CAS: NORM BRAKE FAIL (Warning)
BRAKE 50% DEGRADED (Caution)
L OUTBD BRAKE FAIL (Caution)
BRAKE FAULT (Advisory)
System Description: 32-43-00 - Brake Control System
Schematic Diagram: [ G5000 ]  [ Global Express ]  [ Global XRS ] SSM 32-43-00-101 - Brake Control System - Electrical Schematic
Wiring Diagram: [ G5000 ]  [ Global Express ]  [ Global XRS ] WM 32-43-00-3_001 - Sheet 1 - Left Hand Side - [9002]
[ G5000 ]  [ Global Express ]  [ Global XRS ] WM 32-43-01-1_001 - Sheet 1 - Left - ALL

Message Description:

Left Outboard Brake Control Valve (BCV) has been detected failed by the Brake Control Unit (BCU).

Possible Causes:

  • Left Outboard Brake Control Valve (BCV) (MT53)
  • Brake Control Unit (BCU) (A71)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin:

  • AW700-32-0138 - Loss of Normal Braking Upon Landing
  • AW700-32-0244 - Operational Procedures to Prevent Freezing Brakes
  • AW700-32-0359 - Brake Control System - Data Gathering to Reduce the Brake Control Unit (BCU) No-Fault-Found (NFF) rate
  • AW700-32-0513 - Wheel Speed Transducer - Brake System Nuisance Fault Messages
  • SB700-32-016 - MODIFICATION - BRAKE CONTROL SYSTEM - PART NO. CHANGE OF THE BRAKE CONTROL UNIT TO GW415-7125-5

Full Throttle Blog/Forum Articles/Infoservice/Newsletter: None

Flight Operation Notifications Manual (FONM): None

NOTES:

  • If you replace a brake system component please fill out this questionnaire.
  • Check resistance of BCV coil in accordance with BCV resistance check (extracted from CMM 32-43-67).

Quick Links:

Grounding of the Aircraft [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM10-11-00-867-801
Removal of the Covers and Plugs [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM10-12-00-020-801
Installation of the Covers and Plugs [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM10-12-00-420-801
Standard Aircraft Configuration for Maintenance [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM12-00-00-867-801
Aircraft Walkaround (for Maintenance) [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM12-00-00-867-802
Connect Electrical Power to the Aircraft [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM24-00-00-861-801
Remove the Electrical Power from the Aircraft [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM24-00-00-861-802
Electrical/Electronic Safety Precautions [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM24-00-00-910-801
Electrostatic Discharge Safety Precautions [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM24-00-00-910-802
Operational Test of the Brake System [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM32-43-00-710-801
Removal of the Brake Control Unit [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM32-43-01-000-801
Installation of the Brake Control Unit [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM32-43-01-400-801
Removal of the Brake Control Valve [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM32-43-09-000-801
Installation of the Brake Control Valve [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM32-43-09-400-801
Access to Active Faults [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM45-45-00-970-802
Access to Stored Faults [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM45-45-00-970-803
Access to System Diagnostics [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM45-45-00-970-804
Flight Deck Effect to Fault Correlations [ G5000 ]  [ Global Express ]  [ Global XRS ] AMM45-45-00-970-821
Wire Repair - Maintenance Practices - ALL [ G5000 ]  [ Global Express ]  [ Global XRS ] SPM20-12-10-02

Troubleshooting Recommendations:

  1. Interchange left outboard BCV with right outboard BCV.

    1. If system checks are good, replace left outboard BCV and do close out.
    2. If fault remains, continue with next step.
      NOTE: Check resistance of BCV coil to confirm BCV circuit.

  2. Perform wiring checks between left outboard BCV and BCU.

    1. If wiring checks are not good, repair defective wiring as required and do close out.
    2. If wiring checks are good, continue with next step.

  3. Replace BCU.
  4. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.