background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

08/16/19

Message Overview:

Fault Message:

RUDDER CONTROL RVDT/WIRING

Fault Code:

3250007DWY

Associated CAS:

NOSE STEER FAIL
(Caution)

Reporting LRU: Steering Control Unit (SCU)
System Description: 32-51-00
Schematic Diagram: 32-51-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 32-51-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

The Steering Control Unit detected a problem with the Rudder Pedal Control Rotary Variable Differential Transducer (RVDT) or its interface to the SCU.

Possible Causes:

  • Rudder Pedal Dual Rotary Variable Differential Transducer (RVDT) (MT219)
  • Steering Control Unit (SCU) (A36)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

The Fault annunciation window in front of the Steering Control Unit (SCU) may be used to identify which part of the system failed.

Quick Links:

Rigging of the Nosewheel-Steering Control System
(Recommended Procedure)		 AMM 32-51-00-820-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Rigging Check of the Nosewheel-Steering Control System AMM 32-51-00-220-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Steering Control Unit AMM 32-51-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Steering Control Unit AMM 32-51-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Rudder-Control Rotary-Variable
Differential-Transducer (RVDT)		 AMM 32-51-09-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Rudder-Control Rotary-Variable
Differential-Transducer (RVDT)		 AMM 32-51-09-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

NOTE: The Rudder Pedal RVDT position can be monitored in CAIMs under the Nose Wheel Steering Control Unit (SCU) rigging page.

  1. Re-seat SCU.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  2. Perform the Rigging of the Steering control system.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  3. Perform a wiring check between SCU and Rudder Pedal Control RVDT.

    1. If wiring checks are not good, repair defective wiring as required and do close out.
    2. If wiring checks are good, continue with next step.
      NOTE: While wiring checks are being accomplished have a second person gently 'shake down' wiring from the RVDT. Inspect wiring on RVDT carefully for extreme bends and kinks or breaks.

  4. Replace Rudder Pedal Control RVDT.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  5. Replace SCU.
  6. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.