10/01/19
Message Overview:
Fault Message:
R CH A AIR DATA COMP MACH NO RNG MA
Fault Code:
7327514RBR
Associated CAS:
| Reporting LRU: | Right Engine Electronic Controller (EEC) |
| System Description: | 73-20-00 |
| Schematic Diagram: | 76-10-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 71-50-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
This message is set when the value of MACH sent by the aircraft is defective. The signal is sent to channel A of the Engine Electronic Controller (EEC) by the Micro Air-Data Computer (MADC) 2 or MADC 3. These circuits are continuously monitored by the Full-Authority Digital Engine-Controller (FADEC).
The message CAIMS - L CH B AIR DATA COMP MACH NO RNG MA could also show. This will be set as a result of MADC to MADC data cross check by air data selection.
Possible Causes:
- Right Engine Electronic Controller (EEC)
- Micro Air-Data Computer (MADC) 2 (A28)
- Micro Air-Data Computer (MADC) 3 (A29)
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Micro Air-Data Computers | AMM 34-11-09-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Micro Air-Data Computers | AMM 34-11-09-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Engine Safety Precautions | AMM 71-00-00-910-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Opening of the Cowls | AMM 71-10-00-010-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Closing of the Cowls | AMM 71-10-00-410-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Visual Check of the Engine Controlling System | AMM 73-20-00-210-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Deactivation of the Thrust Reverser (for Maintenance) | AMM 78-30-00-040-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Activation of the Thrust Reverser (for Maintenance) | AMM 78-30-00-440-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Engine Electronic Controller (EEC) | EMM 73-21-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Engine Electronic Controller (EEC) | EMM 73-21-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Check if the CAIMS fault message R CH A AIR DATA COMP MACH NO RNG MA shows.
- If the CAIMS fault message R CH A AIR DATA COMP MACH NO RNG MA shows, replace MADC 3 and do close out.
- If the CAIMS fault message R CH A AIR DATA COMP MACH NO RNG MA does not show, continue with next step.
- Perform the visual check of the engine controlling system.
- If fault remains, repair as required and do close out.
- If system checks are good, continue with next step.
- Check if the CAIMS fault message R CH A AIR DATA COMP MACH NO RNG MA still shows.
- If the CAIMS fault message R CH A AIR DATA COMP MACH NO RNG MA shows, replace right EEC and do close out.
- If the CAIMS fault message R CH A AIR DATA COMP MACH NO RNG MA does not show, continue with next step.
- Check if the CAIMS fault message R CH A AIR DATA COMP MACH NO RNG MA is present. Is the fault still active?
- If YES, replace right EEC and do close out.
- If NO, continue with next step.
- Check if the two CAIMS messages that follow shows:
- R CH A AIR DATA COMP MACH NO RNG MA
- R CH B AIR DATA COMP MACH NO RNG MA
- If the above two CAIMS messages does not show, do close out.
- If the above two CAIMS messages shows, continue with next step.
- Replace MADC 2.
- Do close out.