background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/10/23

Message Overview:

Message Name:

PMAT ERROR MESSAGES/LDI RELATED

Message Code: 454OBS004
Effectivity: All
System: Central Aircraft-Information Maintenance System (CAIMS)
System Description: 45-45-00
Schematic Diagram: 45-45-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 45-45-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Message Description:

One of the following messages is displayed on the Portable Maintenance-Access Terminal (PMAT):

  • CDB Exception: Could not delete from specified tables
  • CDB Exception: Data has changed; operation stopped
  • Could not open file 'I'
  • Could not open DYNASET to count GetAIlLRU info 1
  • Could not open DYNASET to count LRU info
  • DLL_MGR: ASCB Initialization FAILED!
  • Run-time error '3051': Microsoft jet database engine cannot open the file 'C:\CAIMS\DATABASENAME.0XX'. It is already opened exclusively by other user, or you need permission to view its data
  • CDB Exception Data has changed

NOTE: For other possible database error messages, refer to PMAT ERROR MESSAGES/FHDB RELATED.

Possible Causes:

  • Portable Maintenance Access Terminal (PMAT) (AM-200)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Connect Electrical Power to the Aircraft AMM 24-00-00-861-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Remove the Electrical Power from the Aircraft AMM 24-00-00-861-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of Loadable Diagnostic Information (LDI)
on the CAIMS PMAT		 AMM 45-45-00-960-804 [ Global Express ]  [ G5000 ]  [ Global XRS ]
CAIMS PMAT General Instructions AMM 45-45-00-970-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
PMAT Shutdown AMM 45-45-01-840-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Portable Maintenance-Access Terminal (PMAT) AMM 45-45-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Portable Maintenance-Access Terminal (PMAT) AMM 45-45-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Cancel the error message.
  2. Re-install the LDI database with the most current version on your PMAT. You can find the appropriate files and instructions on the Bombardier Customer Portal website using the following path:

    • Login the Bombardier Customer Portal website
    • Select the SERVICES tab in the left pane
    • Select TECHNICAL TOOLS
    • Select Global Express/Global XRS/G5000 Downloads
    • At the top of the page, select CAIMS LDI Software
    • Select the correct LDI file and follow instructions on page

  3. Start CAIMS and check that it starts normally. Is the fault resolved?

    1. If YES, do close out.
    2. If NO, continue with next step.

  4. Replace the PMAT.
  5. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.