background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

09/12/19

Message Overview:

Fault Message:

BLEED MANAGEMENT CONTROLLER #2

Fault Code:

3616329BMC

Associated CAS:

APU BLEED SYS FAIL
(Caution)

R BLEED SYS FAIL
(Caution)

R PACK AUTO FAIL
(Caution)

BLEED MISCONFIG
(Advisory)

R BLEED FAULT
(Advisory)

Reporting LRU: Bleed Management Controller (BMC) 2
System Description: 36-11-00
Schematic Diagram: 36-11-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 36-11-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

An internal failure has been detected in Bleed Management Controller (BMC) 2. Inhibited during Take-off and Landing.

Possible Causes:

  • Bleed Management Controller (BMC) 2 (A70)

Troubleshooting Tips:

Advisory Wire/Service Bulletin:

  • AW700-36-0365 - Bleed management controller - Data Gathering to reduce No Fault Found (NFF) raterate

Forum Articles/Infoservice/Newsletter:

  • Forum Article 2011-VOL 8 issue 23 - Bleed Management Controller (BMC) Top 10 No Fault Found (NFF) vs. Reliability Improvement Modification Program (RIMP) implementation
  • Questionnaire for replacing the BMC. Follow instructions using this (Fill out form)

NOTE: Always verify you are working with the current document revision. Access the CIC website to ensure the latest document revision.

NOTE: This message can show when there is a loss of power. Make sure that there are no other messages related to the loss of power.

Quick Links:

Removal of the Bleed Management Controller AMM 36-11-33-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Bleed Management Controller AMM 36-11-33-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Replace BMC 2.
  2. Do close out.

NOTE: This message can show when there is a loss of power. Make sure that there are no other messages related to the loss of power.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.